英文中文

Tel: +86 755 6680 6470

Fax: +86 755 2322 9300

Mobile: +86 150 13669906

Address: 1st Flr, Bld 2, Jiujiu Youpin Cultural Creative Park, Rd Junlong, Yousong Community, Longhua Shenzhen 518109, China

 

 

 

Ten steps to GS1 barcode implementation

Source:http://www.gs1.org/ Date:2015-07-02

Abstract:

The most important implementation resource for barcode identification are the over 100 GS1 Member Organisations in countries all around the world. This guide takes new barcode users through the basic steps they must take to begin using barcodes.

 

 
Ten Steps to Barcode Implementation
 
·Step 1    Get a GS1 Company Prefix
·Step 2    Assign numbers
·Step 3    Select a barcode printing process
·Step 4    Select a "primary" scanning environment
·Step 5    Select a barcode
·Step 6    Pick a barcode size
·Step 7    Format the barcode text
·Step 8    Pick a barcode colour
·Step 9    Pick the barcode placement
·Step 10  Build a barcode quality plan

Step 1: Get a GS1 Company Prefix
 
Before a company can begin using barcodes, they must first assign the numbers that go inside the barcode, called GS1 Identification Keys. The first step in assigning a GS1 Identification Key is to obtain a GS1 Company Prefix from a GS1 Member Organisation. The GS1 Company Prefix provides a way for companies to create identification keys for trade items, logistic units, locations, parties, assets, coupons, etc. which are unique all around the world. GS1 Company Prefixes are used by 1,3 million companies worldwide as the basis for creating unique numbers to identify everything in the supply chain.

Step 2: Assign numbers
 
After receiving a GS1 Company Prefix, a company is ready to begin assigning identification numbers to their trade items (products or services), themselves (as a legal entity), locations, logistic units, individual company assets, returnable assets (pallets, kegs, tubs), and/or service relationships.
The process is simple. Your local GS1 Member Organisation can provide you with specific information about how many numbers you can assign based on the length of your GS1 Company Prefix

Step 3: Select a barcode printing process

To begin, you should decide what you are barcoding and if the barcode will carry static or dynamic information inside it. An example of static information would be simply a product identification number (GTIN) on a cereal box.

An example of dynamic information would be printing serial numbers on product labels.
 
If your barcode has static information and you need a large volume of labels then you will likely ask a printing company to print your labels.
 

Printing Methods

Traditional: flexography and offset

Digital: thermal and laser

Direct Marking: eg. etching, engraving

if you need a small volume of labels or need to print labels with dynamic information you will likely need an on-demand printer like a laser printer in your office or thermal transfer printer in your warehouse.
 
Knowing how you will print your barcode is an important question to answer in developing a good barcode implementation plan.
 
Your local GS1 Member Organisation is there to assist you in making the right selection, and many Member Organisations can also help you find a printing company in your local area.
Step 4: Select a "primary" scanning environment
 
The specifications for barcode type, size, placement, and quality all depend on where the barcode will be scanned. By knowing where your barcode will be scanned you can establish the right specifications for its production.
 
Barcodes to be scanned at the retail point-of-sale will need to support omni-directional scanning.
 
If the barcode will be scanned at point-of-sale as well as in the warehouse, you will need to use a symbol that accommodates point-of-sale scanning, but printed in a larger size to accommodate scanning in the distribution process.
 
Barcodes on healthcare items to be scanned in hospitals and pharmacies do not require omni-directional scanning, unless the items are also scanned at retail Point-of-Sale.
 

Scanning Environments

  • Point-of-sale
  • General Distribution and Logistics
  • Healthcare items
  • Direct part marking
Step 5: Select a barcode
 
Selecting the right barcode is critical to the success of your barcode implementation plan, but here are some high level tips:
 
  ·If you need to barcode a trade item that will be scanned at the retail Point-of-Sale     (POS), first symbol of           choice is the EAN/UPC symbol. This symbol is guaranteed to be     scanned by POS systems all over the world. In some     cases GS1 DataBar symbol may be       applied.
  
 ·If you are printing a barcode with variable information like serial numbers, expiry dates,or measures, then you           will use GS1-128, GS1 DataBar, or GS1 2D symbols.

  ·If you want to encode a URL into a barcode to make extended packaging information available to the end                   consumer, then you should use a GS1 2D symbol.

  ·If you need to barcode an outer case to be scanned in a logistics environment, and       you want to print directly       on corrugated carton, ITF-14 may be the choice for you.


 

Step 6: Pick a barcode size
 
After the correct barcode symbol is specified together with the information to encode in it, the design stage begins. The size of the symbol within the design will depend on the symbol specified, where the symbol will be used, and how the symbol will be printe
 
Symbol sizes
 
Symbol sizes The X-dimension is the specified width of the narrowest element of a barcode. X-dimensions are used together with the symbol heights to specify the permissible symbol sizes. For each scanning environment the relevant symbols are listed with their target X-dimension and corresponding target height. Besides the target sizes also the allowed minimum and maximum sizes are specified.
     

Minimum X-dimension 0.264 mm ; 0.0104"
Minimum symbol height 18.28 mm ; 0.720"
 
Target X-dimension 0.330 mm ; 0.0130"
Minimum symbol height 22.85 mm ; 0.900"
 
Maximum X-dimension 0.660 mm ; 0.0260"
Minimum symbol height 45.70 mm ; 1.800"
EAN/UPC symbols
 
EAN/UPC Symbols are designed for scanning by retail omni-directional scanners. This means that EAN/UPC Symbols have two segments which are taller than they are wide. There is a fixed relationship between symbol height and width. When one dimension is modified, the other dimension should be altered by a proportional amount.
 
In order to decrease the amount of space EAN/UPC Symbols take up on a design, a decreased symbol height might be specified. This process, called truncation, is not permitted within EAN/UPC Symbology specifications and should be avoided. This is because of the negative impact it has on scan rates for retail omni-directional scanners.
 
Consideration of the printing process
 
The final major consideration for symbol size is the capability of the selected printing process. The minimum size (magnification) and correct Bar Width Reduction (BWR) for a symbol varies by printing process and even from press to press. Printing companies should establish a minimum symbol size (magnification) and BWR to achieve acceptable and repeatable quality results.

Omni-directional

EAN/UPC symbols are suitable for omni-directional scanning since they can be read from all directions by a fixed scanner.


Step 7: Format the barcode text
 
The text beneath a barcode, called Human Readable Interpretation (HRI), is important because if the barcode is damaged or of poor quality to begin with, then the text is used as a back-up.
 
Here are some of the most frequently asked questions on HRI:
 
Does the Human Readable Interpretation need to be a certain size?
 
The human-readable text must be clearly legible and in a size proportional to the symbol size.
 
Is the Human Readable Interpretation supposed to be above or below the symbol?
 
HRI should be placed below the barcode and grouped together wherever physically possible while maintaining the HRI legibility and minimum barcode height.
 
I see parentheses around the Application Identifiers (AI) under some barcode symbols. Are they supposed to be there and are they encoded in the bars and spaces of the symbol?
 
All AIs must be enclosed in parentheses in the Human Readable Interpretation, but the parentheses are not encoded in the symbol.
 
How many digits do I print beneath the EAN/UPC Symbol in the Human Readable text?
 
·You must print 12 digits below the UPC-A Symbol.

·You must print 13 digits below the EAN-13 Symbol.
 
The text beneath a barcode, called Human Readable Interpretation (HRI), is important because if the barcode is damaged or of poor quality to begin with, then the text is used as a back-up.
 
Here are some of the most frequently asked questions on HRI:
 
Does the Human Readable Interpretation need to be a certain size?
 
The human-readable text must be clearly legible and in a size proportional to the symbol size.
 
Is the Human Readable Interpretation supposed to be above or below the symbol?
 
HRI should be placed below the barcode and grouped together wherever physically possible while maintaining the HRI legibility and minimum barcode height.
 
I see parentheses around the Application Identifiers (AI) under some barcode symbols. Are they supposed to be there and are they encoded in the bars and spaces of the symbol?
 
All AIs must be enclosed in parentheses in the Human Readable Interpretation, but the parentheses are not encoded in the symbol.
 
How many digits do I print beneath the EAN/UPC Symbol in the Human Readable text?
 
  ·You must print 12 digits below the UPC-A Symbol.

  ·You must print 13 digits below the EAN-13 Symbol.

  ·You must print eight digits below UPC-E and EAN-8 Symbols.

Step 8: Pick a barcode colour
 
The optimum colour combination for a barcode symbol is black bars with a white background. If you want to use other colours, the following may help you in choosing satisfactory ones:
 
 ·GS1 barcodes require dark colours for bars (e.g., black, dark blue, dark brown, or        dark green).

 ·The bars should always consist of a single line colour and should never be printed by    multiple imaging tools (e.g.,      plate, screen, cylinder).

 ·GS1 barcodes require light backgrounds for the Quiet Zones (area free of printing        around the barcode) and spaces          (e.g., white).

 ·In addition to light backgrounds, "reddish" colours may also be used. If you have ever    been in a darkroom with red        lighting and tried to read red copy, you know it      can virtually disappear. This is also true of similar colours such as    orange, pink,    peach, and light yellows. Given the fact that most barcode scanners use a red light      source, you can        quickly    see why these colours may be suitable for backgrounds, but should be avoided for        bars.

 ·In many cases the symbol background is not printed and the colour of the packaging substrate is used as barcode          background. Hower, if the symbol background is printed beneath the bars, the background should be printed as solid        line colours.

 ·If you use multiple layers of ink to increase the background opacity, each layer should be printed as a solid colour.

 ·If you use a fine screen to deliver more ink to the substrate, be sure there are no voids in the print caused by the      screen not adequately filling in.

As explained, black bars and white spaces are the optimal combination, but other colour combinations can be used. Consult an experienced printing company recommended by your GS1 Member Organisation for additional guidance.

Step 9: Pick the barcode placement
 
When discussing symbol location we are referring to the symbol placement on the design.
 
When assigning symbol placement first the packaging process should be considered. You should consult the packaging engineer to make sure the symbol will not be obscured or damaged (e.g., over a carton edge, beneath a carton fold, beneath a package flap, or covered by another packaging layer).
 
After determining the proper placement, the printing company should be consulted. This is because many printing processes require barcodes to be printed in a specific orientation to the feed direction of the web or sheet.
 
When using flexographic printing, the bars should run parallel to the press direction. If the bars are required to run perpendicular to the press direction check to ensure the symbol is not distorted.
 
When using either silk screen or rotogravure printing processes, the symbol should be aligned parallel to the cell structure on the screen or gravure plate cylinder to provide the smoothest bar edge possible.

Step 10: Build a barcode quality plan
 
ISO/IEC 15416 Barcode Print Quality Test Specifications for Linear Symbols describes a method for assessing the quality of barcode symbols after they are printed. An ISO-based verifier looks at the symbol in the way a scanner does, but goes further by grading the symbol's quality.
 
GS1 utilises the ISO/IEC method, but specifies the minimum grade necessary for every GS1 barcode based on which symbol is used, where it is used, or what identification number it is carrying. In addition to the minimum grade, GS1 also specifies the verifier aperture width and wavelength.
 
Setting up different minimum specifications is similar to a university using a standardized test to determine whether applicants qualify for admission. Several universities may utilize the same standardized test, but each sets the minimum score necessary for its applicants to be admitted.

TypeInfo: Industry News

Keywords for the information:GS1  barcode  Barcode printer  UPC  Symbol sizes